VEEM Interceptor Strip Tool

VEEM Interceptor Strip Tool

VEEM Interceptor technology has revolutionized the propeller industry by enabling the relative pitch of each propeller blade to be altered to enhance performance.

To remove or install your Interceptor strips, use the guide below:

1. Strips are removed by sliding them toward the hub.
2. Cut the new strips so they are 1 inch less than the length of the groove in the propeller.
3. Ensure that the grooves are clean. (Important)
4. Insert Strips by sliding them in from the hub towards the tip.
5. The color strip is inserted, pushing it all the way towards the tip.
6. For removal a little heat may be applied to the underside of propellers blade to expand the metal.